Question: Can I Put A 20 Amp Fuse In A 15 Amp Slot?

Why does my 15 amp fuse keep blowing?

If the cigarette lighter fuse is 15 amps, then a draw of more than 15 amps will cause it to blow.

And if the problem in your circuit is actually some type of short, putting in a larger fuse may cause the wiring to heat up to the point where it could melt or even cause a fire..

Can I put a 15 amp fuse in a 10 amp slot?

Yes, the 15 Amp fuse may be sized for a device in that particular circuit, and the 10 Amp fuse may be very short lived.

What is a 13 amp fuse used for?

Plugs for appliances rated between about 700 watts and 3000 watts (the maximum rating of a wall socket) should be fitted with a 13-amp fuse (coloured brown). For example: 13A Fuse – Washing machine, dishwasher, microwave, kettle, toaster, iron.

Can you put a 16 amp fuse in a 13 amp plug?

Yes they will. You’ll get about 150A from a 13A supply, any more than that and the fuse will probably pop but it won’t cause any damage to the machine or the supply.

Can you put a 20 amp fuse in a 10 amp?

It is generally not recommended to go up in size on fuses, as the fault might be big enough to cause fires and further destruction of property and personnel. Get a qualified electrician in to investigate the circuit for the fault and replace the 10 amp fuse with a 10 amp fuse once the problem is corrected.

What happens if you use a lower amp fuse?

Do not use a fuse with a lower rating– don’t put a 20 amp fues in a 30 amp circuit–because it probably will blow prematurely. Conversely replacing a 20-amp fuse with one rated at 30 amps is dangerous because it may not blow soon enough and damage an electrical component or start a wiring fire.

Can I put a 5a fuse in a 13a plug?

No. You must use a 5A fuse. Using A 13A fuse is a fire risk. The fuse is there to protect the adapter in case of a fault.

Can I use any 20 amp fuse for my microwave?

Answer Lisa, Yes, the 20 amp fuse WB2X3910 would be the be the correct fuse for your GE microwave.

Can you replace a fuse with a higher amp?

Never replace a blown fuse with a higher-amp fuse. Always replace the fuse with one with the specified amp rating. You may install the next-smaller-rated fuse to get you by in a pinch until you can purchase a replacement.

Can I put a 30 amp fuse in a 20 amp slot?

You might put the 30 Amp fuse instead and nothing bad happens. … since the wiring in the circuit was probably sized to the 20 amp fuse you would probably overload the circuit and cause a fire that would burn down the house and kill you as you slept.

What happens if you put a bigger fuse?

In general, NO. Replacing a fuse with a higher-amp fuse is a very bad idea and can lead to fires. Fuses (and circuit breakers) are rated such that they blow or trip before any part of the circuit gets to a dangerous current. … Fix the underlying problem, and you won’t have any more blown fuses.

Can I put a 10amp fuse in a 13 amp plug?

If you replaced it with 13A fuse, it will allow current more than 10A, so it may possible that other components may get damage due excessive current flow than specified. If TV components can sustain up to 13 A current, you can replace it.

What happens if you use the wrong amp fuse?

Fuses are present to protect the components of the electrical system. Rather than destroying the circuit when there is a surge of power, the fuse blows to protect it. … If you use a fuse with the wrong amperage, the fuse won’t blow as intended, damaging the circuit and resulting in a much larger repair bill.

Can I put a 10amp fuse in a 5 amp?

Possibly yes. What ever is wired into that 5 amp slot is rated for a max of 5 amps, overdrawing more than 5 amps by removing the 5 amp fuse and putting in a 10 amp fuse can possibly short out a circuit.